|
|  |
|
Here I installed a set of MB Quart Discus DSD 213 (5.25 Component set) The depth of the door is very shallow because of the door glass.
|
|
|
THIS IS THE FRONT DRIVERS SIDE INSTALL. THE PASSENGER SIDE IS SLIGHTLY DIFFERENT BUT THIS WILL GIVE YOU THE GENERAL IDEA!
| THIS IS THE ORIGINAL GRILL |
|
| REMOVE ALL THE PLASTIC GRILL BRACING |
|
| GRIND ALL OF THE GRILL EDGES OFF |
|
| USE CARDBOARD TO DESIGN A TEMPLATE. |
|
| THEN USE 1/4 INCH MDF TO MAKE THE MOUNT |
| MAKE SURE YOU SPACE OUT BOTH SPEAKER COMPONENTS |
|
| REMOVE ONE OF THE GRILL HOLDERS |
|
| BEND THE TAB IN A "L" SHAPE (90 DEGREE) |
|
| FOLLOW THE PICTURE AND REINSTALL IT (FOR SUPPORT) |
|
| INSTALL THE SPEAKERS AS SHOWN |
|
| DRILL A HOLE THAT LINES UP WITH GRILL TAB MOUNTS |
|
| (see picture below for tab mount) |
| THIS IS THE GRILL TAB MOUNT THAT YOU WILL USE |
|
| (use a 1 inch screw to secure the grill to the speaker mount) |
| PICTURE OF SCREW IN PLACE |
|
| USE A HOT GLUE GUN TO SEAL AND SECURE THE SPEAKERS |
|
| ITS ALL DONE AND YOU STILL HAVE THE STOCK LOOK! |
|
|
|
|
|
|
|
|
|
|
|
| |
